Industrial Air Coolers - Products

Evaporative Air Cooler
Evaporative air cooler is also called evaporative air conditioner, desert cooler, swamp cooler, air cooler, water-cooled air conditioner, environmental air conditioner.

The working concept
Using the circulating pump to pumping the water out of the tank, and trough the water distribution system spray evenly on the evaporation filter layer, the outdoor hot air enter the evaporation cooling medium, in the medium (honeycomb filter layer of special material, so that better cooling efficiency ) to proceeding the fully heat exchange with water. Through the evaporation wet curtain, which the transfer area is several times lager than the surface, to absorb a lot of heat, so as to achieve the purpose of cooling. The cool and clean air cooled by water evaporation absorbs the heat, pressurized by the low-noise fan into the room, and make the indoor hot air exhaust to the outside, and achieve the purpose of cooling the indoor air.

The application scope

  • Manufacturing industry such as textile, machinery, ceramics, fine chemical industry, metallurgy, glass, hardware, leather, etc
  • Making processing industry such as electroplating, electron, shoemaking, printing and dyeing, plastic, clothing, printing, packaging, food, etc.
  • Hospital, waiting room, school, reception room, superstore, laundry;
  • Public place such as kitchen, food market, large entertainment center, underground parking place, station, etc;
  • planting and breeding places such as greenhouse, flowers and plants, poultry, animal husbandry, etc.
  • Refitting and installation of existing air-condition and wind giving machine equipment.
  • For the places needed high moisture such as textile and farm, may adopt part of interior installation;
  • For some places which require lower moisture and more cleanness, please think whether it is suitable.
The wind outlet style
A: top discharge
B: side discharge
C: bottom discharge
The advantage
1). Less investment, great efficiency
2). Low power consumption, only 1 degree of electricity per hour
3). the cold air volume reach 18000m'/h, big air pressure, blast air far
4). Full-automatic electronic control and automatic cleaning function
5). Use the super silent three-blade or centrifugal wind wheel, low noise, high efficiency
6). Use 100mm multi-layer fiber wave-dimension composite material, wet curtain, with strong cooling capability
7). Ventilation, air renewal, dust removal, deodorization
8).Evaporation increases the oxygen in the air, environmental friendly, good for human healthy, improve the working efficiency
9). Natural air or post air, free to choose
10). Humidity control, control the humidity of some places needed high humidity

Casing: modified PP plastics adopted, high strength, not easy deformation, anti-ultraviolet ray and ageing resistance Blower fan: novel wind blades adopted, sufficient air quantity, high pressure, and effective noise inhibition //Centrifugal wind wheel: super-silent, high hydrostatic pressure, blowing further
Motor: full aluminum casing adopted, good appearance, light weight, quick heat dissipation, high efficiency, dust and moisture prevention, high quality dual sealed bearings equipped, and high safety and maintenance free.
Wet curtain: imported paper adopted, good water absorption, high evaporation efficiency, specially formulated glue, greenness and environmental protection, good viscosity, no degumming even being soaked all the year around, and a long service life Water pump: a permanent magnetism footed pump, high efficiency, and overcoming the defect of easy damage caused by water deficiency, idling and scaling With an outside dust screen, this can be easily removed and cleaned.

Model SS-01 - Top Discharge Centrifugal Air Cooler
Model SS-01

Fan style: Centrifugal
Power: 1.5KW /2.2KW
Air outlet style: Top discharge
Airflow: 18000-28000 m3/h
Wind pressure: 196-250Pa
Voltage: 220V/380V
Usable area: 80-200 M2
Noise: 70db
Dimension: 1080*1080*950 mm
Wind outlet size: 460*670 mm
Fan speed: single/various speed

Model SS-02: Bottom Discharge Centrifugal Air Cooler
Model SS-02

Fan style: Centrifugal
Power: 1.5KW /2.2KW
Air outlet style: bottom discharge
Airflow: 18000-28000m3/h
Voltage: 220V/380V
Usable: area 80-200 M2
Noise: 70db
Dimension: 1080*1080*950 mm
Wind outlet size: 670*460 mm
Fan speed: single/various speed
Wind pressure: 196-250Pa

Model SS-03: Top Discharge Evaporative Air Cooler
Model SS-03

Fan style: Axial Flow
Power: 1.1KW /1.5KW
Air outlet style: top discharge
Airflow: 10000-18000m3/h
Noise: 70db
Voltage: 220V-380V
Usable area: 80-150 M2
Dimension: 950*1080*1080 mm
Wind outlet size: 670*460 mm
Fan speed: single/various speed

Model SS-04: Double-side Top Discharge Evaporative Air Cooler
Model SS-04

Fan style: Axial Flow
Power: 1.1KW /1.5KW
Air outlet style: Double-side top discharge
Airflow: 10000-18000m3/h
Noise: 73db
Voltage: 220V-380V
Usable area: 80-150 M2
Dimension: 950*1080*1080 mm
Wind outlet size: 670*460 mm
Fan speed: single/various speed

Centrifugal Blower
Centrifugal Blower We offer Centrifugal Blower kit made of plastic.
Its very lightweight & of low sound.
As compared to Axial fan blade, this is sould less model.
Also due to its lightweight material the load on motor is less which eventualy reduces your motor capacity & price.